Top 10 Best Floorstanding Speakers Under 2000

There are many floor standing speakers in the market today ranging from the best quality, best designs, and best sounds. But when it comes to choosing the best floorstanding speaker to buy, you will undoubtedly know the right speaker to get by reading this speaker reviews. We have done the leg work, the reviews, and already weighed out among many floor standing speakers to come up with the best for standing speakers, especially our readers who are also lovers of music.

However, for first-timers, it might be a little challenging to know what you should look out for when searching for floorstanding speakers under 2000. But firstly, there are certain guides that you should follow which have been listed and explained below.

Related Speakers: Sony SSCS3 Vs KEF Q100 Passive Speakers

Top 10 Floorstanding Speakers Under 2000

PictureBrandStore
Klipsch RP-280F Floorstanding SpeakerKlipsch RP-280Famazon
Klipsch RP-8060 FA Dolby Atmos Floorstanding SpeakerKlipsch RP-8060FAamazon
Q Acoustics Concept 40 Floorstanding SpeakerQ Acoustics Concept 40amazon
Polk Audio LSiM 705 Superior Floorstanding Tower SpeakerPolk Audio LSiM 705 Superioramazon
MartinLogan Motion 40 Tower SpeakersMartinLogan Motion 40amazon
Klipsch RF-7 III Floorstanding SpeakerKlipsch RF-7 IIIamazon
Pioneer SP-FS52Pioneer SP-FS52amazon
Focal Aria 948Focal Aria 948amazon
Induction Dynamics ID1Induction Dynamics ID1amazon
Klipsch RF-7 II Floorstanding SpeakerKlipsch RF-7 IIamazon

Klipsch RP-280F Floorstanding Speaker
amazon

1. Klipsch RP-280F

Specification:

  • 1″ linear titanium tweeter
  • Dual 8″ cone woofers
  • 90×90 hybrid tractrix horn
  • Tractrix port
  • MDF cabinet
  • Removable grille
  • Dimensions: 43.06” x 10.55” x 18.32”

This is one of the largest and supreme speakers at the Klipsch’s dynasty and they are usually in pairs. Each speaker is mounted with Cerametallic cone woofers and hybrid Tactrix Horn for the quality sound you want in a speaker. Amongst other floor standing speakers under$2000, this is the best of them all. You can also read more about Floor Standing Speakers With Subwoofer.

Design:

These speakers are generally beautiful with a black piano finish.

Features:

Here are some unique features that make this floor standing speaker stand out among many.

  • Klipsch’s cones are made from aluminum that prevents moisture retention.
  • The voice coil in the woofers is endowed with titanium for scanty movement which helps increase its efficiency.
  • The speakers are mounted with glow openings for regulating sound waves to your space. This means that sound waves do not spread in all directions. With this, you are guaranteed nothing but the best clear sounds even in the loudest volumes.
  • The Klipsch’s Hybrid horn is made in a circular-shaped gorge surrounding a titanium diaphragm tweeter for better transmission of sound waves. The Tractrix is horn-shaped for easy airflow inside and outside of the cabinet, which gives a much stronger bass.
  • For a more powerful sound, try the Cambridge Audio CXA81 (80W per channel) amplifier. If you are looking for more bass or want to hook it up with a separate subwoofer, try bookshelf speakers or try the SVS PB-3000.
ProsCons
Top-notch sound quality
Increased bass
Captivating design
Has no known disadvantage

Klipsch RP-8060 FA Dolby Atmos Floorstanding Speaker
amazon

2. Klipsch RP-8060FA Dolby Atmos

Specification:

  • Built-in Dolby Atmos
  • 1” titanium vented tweeter
  • 8″ Cerametallic woofers
  • Bass-reflex
  • Rear-firing tractrix port
  • Removable magnetic grille

This is an advancement of Klipsch’s premier series speakers with advanced audio and improvement of the materials it was made from. If you are a lover of music or movies, this full-range speaker will immerse the sound with technologies that are ideal for delivering the most impactful 360° Dolby Atmos listening experience. It also has one of the topmost efficient transfer of high-frequency waves that cover the listening area, with smooth frequency response, and the cleanest most natural sound. Check out our bookshelf speaker collections.

Design

These speakers are of ebony and walnut finish which is entertaining to the eyes. It is made from aluminum and it is scratch resistant. The aluminum is for reducing the surface area. With a lower surface area, low and faster frequencies are guaranteed.

Features:

  • The rear Tractrix port has two input terminals.
  • The ports are well fitted to the cabinet and the woofers which helps the speakers to establish a clear flow of air.
  • The speakers are equipped with Klipsch’s Tractrix horn technology for high-frequency sounds that are clear.
  • RP-8060FA has an elevation channel speaker at the top of the speaker whose purpose is to reflect sounds away from the ceiling and with stereo sounds for perfect hearing.
  • The speaker terminals are on the lower side of the speaker cabinet for a good connection.
  • The all-time signature Cerametallic woofers on the floor speakers hold shape at lower frequencies for efficiency.
  • For a more powerful sound, try the Cambridge Audio CXA81 (80W per channel) amplifier. If you are looking for more bass or want to hook it up with a separate subwoofer, try bookshelf speakers or try the SVS PB-3000.
ProsCons
Clear sounds
Classy design
It is scratch-resistant
Has Dolby Atmos
An amplifier is needed

Q Acoustics Concept 40 Floorstanding Speaker
amazon

3. Q Acoustics Concept 40

Specification:

  • Gelcoretm construction
  • 2-way reflex double woofer
  • Frequency response (+/- 3 dB): 53hz – 22khz
  • Impedance: 8ohm
  • Sensitivity: 90db

These speakers come in pairs and are slim and beautifully designed. These Q Acoustics concept 40 has an extraordinary soundstage, high sensitivity dynamics, an ultra-low resonance design, an increased bass extension, perfect rigidity, and top of the range music and movie soundtracks.

For a more powerful sound, try the Cambridge Audio CXA81 (80W per channel) amplifier. If you are looking for more bass or want to hook it up with a separate subwoofer, try bookshelf speakers or try the SVS PB-3000.

The speakers are well constructed, beautiful design in glossy white, and solidly built to last. These speakers are rear-ported, I suggest positioning them 2 feet from the wall and 4 feet from any sidewalls to prevent echoing as they require careful positioning. Check out our ceiling speaker collections.

Design

They come in black finishes, multi-layered or in lacquered white, fitted with tripod stands for perfect contact with the floor making it one of the best floor standing speakers in the market today.

Features:

  • These speakers have an aluminum fascia plate finish that’s supports a butyl rubber sheet to the front panel facing the listener for lower resonance.
  • The speaker’s 90Db sensitivity and 8ohms can be used with any amplifier as long as it is of good quality like the Cambridge Audio CXA81 (80W per channel) amplifier.
  • It is mounted with the dual 125mm drive and 25 mm tweeter for increased bass and best performance.
  • The speakers separated by a non-setting adhesive using the GelcoreTM converts kinetic energy into heat. This does reduce the destruction enabling the speakers to give the best performance.
ProsCons
Pure and clear sounds
Sleek and beautiful
Mounted with tripod stand
GelcoreTM cabinet
Requires a careful positioning

Polk Audio LSiM 705 Superior Floorstanding Tower Speaker
amazon

4. Polk Audio LSiM 705 Superior

Specification:

  • 1″ Diameter radiator tweeter
  • Dynamic balance driver
  • Frequency response 20Hz – 40kHz
  • Nominal impedance 8 ohms
  • Efficiency 88 dB

The Polk audio LSIM705 superior has an astonishing and realistic soundstage, imaging, and an improved transient response. The enhanced ring radiator tweeter help improve dispersion, eliminate horn loading, and boasts higher power handling.

This is a good example of a speaker build within a speaker, wide dispersion, and smooth sound output. With both woofers having a dedicated power port for deep bass response, reduce distortion, and a full range sound for music and movie lovers. It is smooth and beautifully designed and the ideal speakers for anyone looking for floorstanding speakers under 2000. Check out our portable speaker collections.

Design:

It is made with light rigid cast aluminum baskets for motor alignment. The cabinet is made of thick MDF. The curved cabinet is made with a premium real wood veneer which makes it attractive to your eyes. It has separate driver chambers to put away standing sound waves. This helps increase driver efficiency. For a more powerful sound, try the Cambridge Audio CXA81 (80W per channel) amplifier. If you are looking for more bass or want to hook it up with a separate subwoofer, try bookshelf speakers or try the SVS PB-3000.

Features:

  • It comes with woofers for good audio performance. The woofers are 5″x 7″ an in oval shape to produce low-frequency sounds.
  • Each woofer has its own power port.
  • The LSiM705 have the most modern LSiM series which does use advanced speaker technology.
  • The speaker’s 4-way design helps in handling the high frequencies, Midbass controls the mid to low frequencies and lastly, the midrange controls the mid frequencies.
ProsCons
4-way design
Clear sounds
Fashionable design
Not the best design

MartinLogan Motion 40 Tower Speakers
amazon

5. MartinLogan Motion 40

Specification:

  • Frequency response 40–25,000 Hz ±3dB
  • Sensitivity 92 dB
  • Impedance 4 Ohms
  • Cast polymer basket
  • Rigidly structured dust-cap
  • Aluminum cone woofers
  • Custom air core coil
  • 5-way bi-wire tool-less binding posts
  • Dimensions 107.9cm x 19.2cm x 32.6cm

This is one of the top brands in the electrostatic loudspeaker industry which comes in pairs. The Motion 40’s outstanding performance is due to its dual oversized black-aluminum cone woofers that are paired with a rear-firing bass port. This helps Motion 40 deliver rich, deep bass, and authentic sound. Beautifully designed with a luscious high-gloss piano black finish, solidly design, and enhanced stability. They deliver increased dynamics and superior high-frequency which makes it one of the best floor standing speakers under $2000. Check out our soundbar speaker collections.

Design:

This speaker gives you an experience that you’ve been seeking. They are in 2 finishes, black cherry wood, and piano black finish. The design is quite revealing without being punishing.

Features:

  • Speakers come with twin sets of 5-way binding posts for bi-amp and rear bass port.
  • They are designed to play either louder or lower volumes.
  • They are mounted with two 8″ woofers for deep bass.
  • They have folded motion tweeters for squeezing air out which helps in well-dispersed sound waves.
ProsCons
Deep bass
Clear sounds
Well designed
Less frequency range

Klipsch RF-7 III Floorstanding Speaker
amazon

6. Klipsch RF-7 III

Specification:

  • 1 3/4″ titanium compression driver
  • Compressed molded-rubber tractrix horn
  • Bifurcated cabinet
  • Dual tractrix ports
  • Dual 10″ cast basket Cerametallic woofers
  • High-quality grade wood veneers

The Klipsch Rf-7 III has an improved detail and creates a clean and the best natural sound possible. The Cerametallic woofers help maintain rigidity, distortion, lightweight, and minimal cone breakup. The floorstanding speaker is well constructed very nice finish and exceptional performance. The frequency range, soft highs, defined media, deep and forceful bass are well compensated. Check out some of the Best Home Theater Speakers Under 300.

Design:

They come in cherry, black ash and walnut finish. The speakers are made with aluminium frames which also have shorting-ring magnet structures to remove modulation of the magnetic flux.

Features:

  • They have titanium diaphragms compression drivers to enrich the phase coherency at the throat of the horn. This helps in improving sound pressure.
  • It has a molded rubber structure for high-frequency damping giving you nothing but the clearest sounds.
  • Have Cerametallic woofers.
  • The RF-7 III helps each driver to work independently from the other. This does prevent wave problems and promote air movement in the cabinet.
Pros
Performance is great
Dual woofers
Can produce a natural sound

Pioneer SP-FS52
amazon

7. Pioneer SP-FS52

The designer of these speakers, Andrew Jones, made a collection of speakers that have a high-quality sound. 130 Watt Power with 8 Element Sophisticated Crossover that enable the speakers to play louder volumes using less power

Design:

They are of curved design with the cabinets using an RF molded design. This design helps in the reduction of standing sound waves.

Features:

  • The speakers have 3 5-1/4 inch woofers for powerful bass sounds.
  • The speaker design reduces waves
  • The speaker grills on the SP-FS52 does protect the speakers. They are removable in case you prefer exposed drivers.
  • These pioneer speakers’ height is 3 inches. This tall design improves the quality of sound.
  • There is an additional surface on the SP-FS52 pioneer for bass accuracy.
  • They also have a pole piece that is well ventilated. This feature improves the bass sounds from previously made models.
  • They have a custom waveguide for the 1 inch highly efficient tweeter to enrich the sweet spot of the tweeter.
ProsCons
Quality sound
Powerful bass sounds
design reduces waves
May not be good for a big room

Focal Aria 948
amazon

8. Focal Aria 948

Specification:

  • 2 speaker drivers
  • Flax bass
  • Flax midrange
  • 1″ inverted dome tweeter
  • Frequency response (+/- 3dB) 37Hz – 28kHz
  • Sensitivity (2.83V / 1m) 92.5dB
  • Nominal impedance 8 Ohms
  • Crossover frequency 280Hz / 2600Hz
  • Dimensions 1150 x 371 x 420mm

The focal Aria 948 has a powerful and intense bass with a 3-way loudspeaker drivers. A natural sound reproduction with low coloration richness. The speaker uses poron material to reduce distortion and an increase sensitivity.

It produces a rich stable sound with one of the best listening pleasures among every other floorstanding speaker. The focal Aria 948 is made from a high-quality flax fiber and enclosed with two fiberglass layers. The bass is solid and controlled, not carelessly loud, or produce those random booming sound effects. The high end and midrange are also very bright and unimaginably clear.

Design:

It comes in different colors and boasts of a beautiful design. It also has a good seating structure. Beautifully crafted all around. Black high gloss and walnut finishes and leather-finished body. The cabinets are fitted with polymer for an excellent performance.

Features:

  • Speakers come with spikes that can be adjusted, with this, you are assured of best sounds.
  • The speakers have a pristine tremble with tweeters from beryllium. They have flax cones for a much warmer musical experience.
  • Aria speakers have two vents for bass confinement.
  • It has a 21 cm flax driver with NIC motor.
  • Its crossover frequency is 250Hz-2500H.
ProsCons
Clear sounds
Beautifully crafted all around
Powerful sound quality
Best high-end two-channel audio
High Price

Induction Dynamics ID1
amazon

9. Induction Dynamics ID1

Specification:

  • Crossover Frequency 700 Hz 3.8 kHz – 80 Hz (switchable)
  • Frequency Response (± 3 dB) 60 Hz – 22 kHz | 25 – 150 Hz
  • Continuous power RMS 150 W – 800 W
  • Inverted titanium dome
  • Midrange Driver 3″ Soft Dome
  • Rubber surrounds and cast frames
  • Power Handling 150 W, 800 W
  • Sensitivity 2.83V/1M 89 dB

Design:

These speakers are designed in a 4 way with a black piano finish and satin finishes. The speakers are quite tall.

Features:

  • They have 5 active drivers’ ports each specifically chosen for a specific role.
  • The speakers can operate on stereo pair (4 way) or in sub(3way) as they have a switch at the back.
  • They have 10 inches’ poly cone subwoofers with special circuits for a much fuller sound.
  • They boast of driver control technology as they also have the S4X TM.
  • They have steep sloping for induction dynamics.
  • Snapp grills of these speakers come in different colors and do offer in-wall versions of the speakers.
ProsCons
Clear sounds
Warm bass
Sounds warm even at high volumes
High price

Klipsch RF-7 II Floorstanding Speaker
amazon

10. Klipsch RF-7 II

Specification:

  • Frequency response 30Hz-24KHz ± 3dB
  • Power handling 250W RMS / 1000W Peak
  • Sensitivity 101dB @ 2.83V / 1m
  • Nominal impedance 8 ohms
  • Crossover frequency 1200Hz
  • Inputs binding posts bi-wire/bi-amp
  • Rear-firing ports
  • Dimension 123.3cm x 29.5cm x 41.5cm

The Klipsch RF 7 II has an amazing sound, the sound is more natural and transparent. The sound clarity is excellent, rich, fantastic, more open, and uncompressed. The RF7-II has a more balanced across the spectrum, hallow, and spreads out around the four corners of the room. Remember, the quality of your speaker sound depends on the room, source file, volume, and placement.

Design:

These speakers boast of a unique old concept in a modern way.it is a mixture of both the old and the new. It is finished in black ash, with a medium cherry furniture-grade wood. It has two cabinets. The cabinets come in cherry, satin black ash that is all hand finished with thick walls of 25mm walls.

Features:

  • The speakers are made from veneered birch plywood and MDF.
  • Uses horn-loaded drivers for sensitivity.
  • Uses a light diaphragm made from polyimide which is in 2 sections. There is a light cone made from the fiber at the rear two-fold birch plywood and the horn.
  • The speakers have a frequency response of 30Hz-24KHz ± 3dB with a dominance of 8 ohms.
ProsCons
It has a classical
A natural sound
Clear sounds
An excellent frequency
The loud volumes are not quite as loud

Here is a guide to the top 10 best floor standing speakers that don’t cost you quite a fortune.

Floorstanding Speakers Under 2000 Buyers Guide

Speaker Size

When looking for a floor standing speaker, you should get one that will fit in your available space. Make sure you are sure of space measurements for the speakers so that you can get one that suits the space.

Speaker Drivers

Usually, floor standing speakers have a number of drivers and they come in different types for different floor standing speakers in the market. However, there are some main types of drivers used for the floor standing speakers. These drivers are:

  • Tweeter drivers: These are drivers for promoting high and small frequencies that range from 2000 to 30000Hz.
  • Midrange drivers: They promote sounds that range from 500-2000Hz
  • Woofer driver: This one promotes sounds that range from 40-1000Hz

The good thing about the floor standing speakers is that they are equipped with a subwoofer for helping with the bass sounds.

Speaker Cabinet

The first thing you should take note of is the material from which the cabinet is made. Choose one that pleases your eyes and one that suits your needs. The second thing you should check on is how that cabinet has been constructed and whether it stands out among many. Another thing you can check on is the seating of the cabinet for placing purposes. We all want a speaker that can sit well on the floor.

Speaker Frequency Range and Outline of Terminals

This will help you choose the speaker you desire for your home. Ensure you check out the wire terminals that the speakers have been equipped with.

With that in mind, you can now choose a speaker for your home to suit your needs and for that theatre sound experience.

Conclusion

Now get yourself some mind-blowing speaker for some warm music. The quality, sounds, prices, and sizes all differ. Remember, I have tried most of these floorstanding speakers under 2000 and can say they are all unique. The reason for these reviews is to give you the buyer a guide, but the end decision is yours to make. Best of luck. Check this out if you will like a more budget floorstanding speaker.

Floorstanding Speakers Under 2000

Top 10 Best Floorstanding Speakers Under 2000 1

Add Comment